3
4
2
specification
dimensions (WxDxH) - 70x66x79mm
material - copper / aluminium
thermal resistance - 0.19 c/w
fan specification - 70x70x15mm, 12V DC, 0.17A,
30dB (max), 3000rpm (max),
Rifle bearing, 50,000 hrs mtbf
mounting system - Intel
®
socket 775, Core™2 Extreme
Edition / Quad / Duo, Celeron
®
D
Pentium
®
Extreme edition / D
thermal paste - SC-102
net weight - 252g (with fan)
printed in taiwan
features
- HDT (heat-pipe direct touch) technology
- 3 x ø6mm high performance U type heat-pipes
- 70mm 4 pin fan with optimised fin shape
- designed to fit S10V & similar low profile chassis
- light weight, sturdy construction
- easy push-fit installation
- thermal paste included
2008 © OrigenAE Technology. All rights reserved.
All trademarks are the property of their respective owners.
™
™
web
http://www.origenae.com
precautions
1. Keep and store the product and it’s components
away from the reach of young children.
2. Check the condition of the product before installation.
If there is any problem, contact the shop where you
purchased to get a replacement or refund.
3 OrigenAE Technology is not responsible for any
damages due to external causes, including but not
limited to, improper use, problems with electrical power,
accident, neglect, alteration, repair, improper installation,
and improper testing.
4. CPU and motherboard are subject to damage if the
product in incorrectly installed. Familiarize yourself with
the “Installation”steps before installing the C10-L775.
5. Check product dimensions to ensure product does
not interfere with any motherboard components.
installation
1. Using a spreader, apply a thin even layer of the thermal
paste in onto the top on the cpu.
2. Once the airflow of the unit has been decided, place
the cooler over the cpu and align the 4 clip-pins
with the motherboard fixing holes. (for users with
an OriginAE S10V, the fan’s airflow should point
towards the exhaust vent, on the side of the chassis).
3. Once all 4 clip-pins are in place, press down
(in diagonal pairs) the 4 lock-pin heads toward
the motherboard until they click into place.
NB. The lock-pins have 90° of rotation - turned
clockwise to stop (against arrow direction)
the lock-pins are totally secure*.
4. Connect the 4-pin fan connector to the motherboard
cpu fan header (check your MB user guide for location).
5. For best results set your motherboard to use
temperature controlled fan speed (optional).
* To remove the cooler from the mainboard, turn all 4
lock-pins 90° in an anti-clockwise direction to stop
(follow arrow direction). While supporting the CPU cooler,
grip the head of each clip-pin and pull upwards until the
pin has dis-engaged from the pin head. The cooler can
now be ‘popped out’ from the motherboard.
1
2
3
4
actual product may differ from illustration
1
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern